High Quality Sewage Treatment Tank / Wastewater Treatment Tank
Brief introduction
Lamella clarifier also called inclined plate sediment tank, is used
to separate sedimentable solid (sedimentable particles) from
liquids.
It is kind of high efficient combined type settling tank; set many
dense inclined tube packing in sediment area, to make the suspended
impurity in water sediment.
Such tank can improve sediment efficiency 50~60%, it can improve
treatment capacity 3~5 times in the same area. It can design
different flow rate inclined plate sediment device according to raw
wastewater test report, it need dose flocculant usually.
Application
In certain instances when it is not feasible to connect residences
or units to public sewer systems, communities may opt for a
clustered wastewater treatment system. Such facilities are smaller
versions of centralized treatment plants and serve only a limited
number of connections. The technologies used for clustered
wastewater treatment may be the same as those used for centralized
systems or for individual on-site systems, depending upon the
specific applications and degree of treatment required. Upon
treatment, effluent from clustered wastewater systems can be
discharged via surface or subsurface disposal methods.
Wastewater reuse
Wastewater can be a valuable resource in cities or towns where
population is growing and water supplies are limited. In addition
to easing the strain on limited freshwater supplies, the reuse of
wastewater can improve the quality of streams and lakes by reducing
the effluent discharges that they receive. Wastewater may be
reclaimed and reused for crop and landscape irrigation, groundwater
recharge, or recreational purposes. Reclamation for drinking is
technically possible, but this reuse faces significant public
resistance.
There are two types of wastewater reuse: direct and indirect. In
direct reuse, treated wastewater is piped into some type of water
system without first being diluted in a natural stream or lake or
in groundwater. One example is the irrigation of a golf course with
effluent from a municipal wastewater treatment plant. Indirect
reuse involves the mixing of reclaimed wastewater with another body
of water before reuse. In effect, any community that uses a surface
water supply downstream from the treatment plant discharge pipe of
another community is indirectly reusing wastewater. Indirect reuse
is also accomplished by discharging reclaimed wastewater into a
groundwater aquifer and later withdrawing the water for use.
Discharge into an aquifer (called artificial recharge) is done by
either deep-well injection or shallow surface spreading.
Quality and treatment requirements for reclaimed wastewater become
more stringent as the chances for direct human contact and
ingestion increase. The impurities that must be removed depend on
the intended use of the water. For example, removal of phosphates
or nitrates is not necessary if the intended use is landscape
irrigation. If direct reuse as a potable supply is intended,
tertiary treatment with multiple barriers against contaminants is
required. This may include secondary treatment followed by granular
media filtration, ultraviolet radiation, granular activated carbon
adsorption, reverse osmosis, air stripping, ozonation, and
chlorination.
The use of gray-water recycling systems in new commercial buildings
offers a method of saving water and reducing total sewage volumes.
These systems filter and chlorinate drainage from tubs and sinks
and reuse the water for nonpotable purposes (e.g., flushing toilets
and urinals). Recycled water can be marked with a blue dye to
ensure that it is not used for potable purposes.
Specifications and Models
| Model | WSZ-AO-3 | WSZ-AO-5 | WSZ-AO-10 | WSZ-AO-15 | WSZ-AO-20 | WSZ-AO-25 | WSZ-AO-30 | WSZ-AO-50 |
Water in BOD5(mg/L) | 200 |
Water out BOD5(mg/L) | 10 |
| Capacity(m³/h) | 3 | 5 | 10 | 15 | 20 | 25 | 30 | 50 |
| Weight(t) | 9 | 16 | 35 | 41 | 48 | 54 | 60 | 85 |
Packing and Delivery
1. The normal package is plastic cloth for main machine and wooden
for parts.The wooden box will be fumigated, can also pack it
according to customers special request.
2. The normal package is plastic cloth for main machine and wooden
for parts.The wooden box will be fumigated, can also pack it
according to customers special request.
Why Choose Us?
1. BENENV has more than 2 decades of experience in wastewater and
sludge treatment.
2. We introduce Japanese technology and hire Japanese experts, thus
our product is far more better than other Chinese manufacturers.
3. We only use the best parts from best supplier.
4. We have our own R&D center and complete manufacture system.
The normal lead time is 7-15 days, which depends on your quantity.
